Prof. Dr. Ir. Iswandi Imran

Item
  • Photo & Name (with title)

Prof. Ir. Iswandi Imran, MASc.,Ph.D.

Registered Professional Engineer:

IPTB No.: 0289/P/K-A/DPPB/III-2010 (Updated)

IP No. : 000178/04-16/IP-U/2011

Place, Date of Birth Medan, 06 Desember 1963
Laboratory (Scope of PRI) Structure
Address X-PAU Building, 3rd floor, ITB – Jl. Ganesha No. 10 Bandung
  • Contact
  • Phone
  • Fax
  • Homepage
  • Email

  • Education
1987  Institut Teknologi Bandung, Indonesia

“Sarjana S-1” in Civil Engineering (Structural and Geotechnical Eng)

1990 University of Toronto, Canada

Master of Applied Science in Civil Engineering (Structural Engineering)

1994 University of Toronto, Canada

Doctor of Philosophy in Civil Engineering (Structural/Material Engineering)

  • Research Interest & Competence
Concrete Materials and Structures

Earthquake Resistant Reinforced Concrete Structures

Corrosion and Durability of Concrete Structures

Structural Assessment, Repair and RetrofitBridge Structures

Publication

No. Title Of Research Year
A International Journal :
1 Jonbi Msi, B. Hariandja, I. Imran, and I. Pane (2012), “Material Development of Nano Silica Indonesia for Concrete Mix”, Advanced Materials Research, Vol. 450 – 451, pp. 277-280. 2012
2 P. H. Simatupang, R. Hanafi, B. Sunendar, I. Imran, and I. Pane (2012), “The Study of Red Mud Addition Influences in Metakaolinite-Based Geopolymer Characteristics”, Advanced Materials Research, Vol. 450 – 451,  pp. 281-285. 2012
3 Meas, K., Li, B., Imran, I., (2012) “Seismic Performance of Lightly Reinforced Concrete Exterior Beam-Column Joints”, Journal of Advances in Stuctural  Engineering, No. 11-1462 2012
4 Imran, I. and Mujiman, (2009), Shear Strengthening of R/C Beams Using AFRP Stirrups with Anchored Ends, Malaysian Journal of Civil Engineering, Vol. 21, No.2, pp. 152-167. 2009
B National Journal :
1 Kristianto, A., Imran, I., Suarjana, M., (2011) ”Studi Eksperimental Penggunaan Tulangan Pengekang Tidak Standar yang Dimodifikasi pada Kolom Persegi Beton Bertulang” Jurnal Teknik Sipil ITB, Vol. 18 No. 3, hal.193-215, Desember 2011, ISSN 0853-2982 2011
2 Nuroji, Besari, M.S., Imran, I., (2010) ”Crack Model for Reinforced Concrete Structure” Journal of Civil Engineering of ITB, Vol. 17, No. 2, pp. 103-114, ISSN: 0853-2982 2010
3 Imran, I., Aryanto, A., (2009) ” Behaviour of Reinforced Concrete Frames In-Filled With Lightweight Materials Under Seismic Loads” The Civil Engineering Dimension (Dimensi Teknik Sipil) Universitas Petra, Vol. 11, No. 2, September 2009
4 Ashad, H., Nasution, A., Imran, I., Soegiri, S., (2008) “Optimized Use of Nickel Slag Powder Utilizing C-A-S Ternary System”, Journal of Civil Engineering of ITB, Vol. 15, No. 3, pp. 123-132 (ISSN 0853-2982) 2008
5 Andayani, S.W., Imran, I. (2008) ”Effect of the use of Styrene Co-polymer Natural Latex on Service Life of Concrete Structures”, Journal of Material Technology and Engineering Product, No. 22/2008, pp. 40-44 (ISSN 0852-0615) 2008
6 Ashad, H., Nasution, A., Imran, I., Soegiri, S., (2008) “Role of Nickel Slag Powder in Minimizing the Effect of Intrusion of Micro-organisms on Physical Behavior of Concrete Materials”, Journal of Civil Engineering of ITB, Vol. 15, No. 1, April, pp. 1-13, (ISSN 0853-2982) 2008
C International Conference Proceedings:
1 Imran, I., Simatupang, P.H., (2011) “Perkembangan Terkini Teknologi Material Beton Hijau”, Proceeding The 1st Indonesian Structural Engineering and Materials Symposium (ISEMS), Bandung, 17-18 November, ISBN: 978-979-97606-5-4 2011
2 Wijaya, I. I.D. G. W., Imran, I., Kurniawan, T., (2011) “Konstruksi Jembatan Balanced Cantilever-Pengaturan Camber dan Defleksi Jembatan”, Proceeding The 1st Indonesian Structural Engineering and Materials Symposium (ISEMS), Bandung, 17-18 November, ISBN: 978-979-97606-5-4 2011
3 Simatupang, P.H., Pane, I., Sunendar, B., Imran, I., (2011) “The Comparison of Microscopic and Macroscopic Characeristics Between Lol Calcium Fly Ash Geopolymer Binder and High Calcium Fly Ash Geopolymer Binder Using Indonesian Fly Ash”, Proceeding The 3rd International Conference European Asian Civil Engineering Forum (EACEF), 20-22 September 2011
4 Jonbi, Hariandja, B., Imran, I., Pane, I., (2011) “Material Development of Nanosilica Based on Indonesia Silica Sand for Concrete Mix”, Proceeding The 3rd International Conference European Asian Civil Engineering Forum (EACEF), Yogyakarta, Indonesia, 20-22 September 2011
5 Kristianto, A., Imran, I., Suarjana, M., (2011), “Behavior of R/C Column Confined with Code Non-Compliance Confining Reinforcement Plus Supplemental Pen-Binder under Axial Concentric Loading” Proceeding The 2nd International Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM-II 2011), Surabaya, Indonesia, 19-20 July, pp.F1-F9 2011
6 Kawada, N., Gan, B.S., Imran, I., Ninomiya, H. (2011) “Bounding Grid Algorithm for Calculating Particle Interactons in SPH Simulations”, Proceeding 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong SAR, China, Januari 26-28 2011
7 Nuroji, Besari, M. S., Imran, I., (2010) “Rotated Discrete Crack Model for Reinforced Concrete Structures” Proceedings: 35th Conference on “Our World in Concrete & Structures” 2010
8 Imran, I., Suparyo, Pane, I. (2010) “The Influence of Different Activation Methods on the Effectiveness of Zeolite As Partial Subtitution of Cement In Concrete Mix”, proceeding 5th International Civil Engineering Conference (CECAR-5), Australia, 8-12 August 2010
9 Imran, I., Tjahjanto, H., Gan, B., G, (2010) “Seismic Performance of Masonry-Infilled R/C Frame Structures”, proceeding of the 2nd ASEAN Civil Engineering Conference, Vientine, Lao PDR, 11-12 March, pp. 111-124 2010
10 Imran, I., Eddy, L., Mujiono, Fadilla, E., (2009) “Experimental Study on Column to Column Connections of Precast Concrete System Using Sleeve Type of Connections”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 95-101, ISBN: 978-979-98278-2-1 2009
11 Imran, I., Darmawan, S., Sulaeman, I., Lie, C., Aryantho (2009) “Assessment and Repair/Strengthening of Settlement Damaged Office Building” Proceeding of 1st International Conference on Rehahabilitation and Maintenance in Civil EngineeringForum (ICRMCE) 21-22 March, ISBN : 070-408-457-4 2009
12 Imran, I., (2009) “Assessment and Repair/Strengthening of a Settlement Damaged Office Building” proceeding 1st ICRMCE, Solo, 21-22 March 2009
13 Imran, I., Aryanto, A., (2008) “Experimental Study on the Behavior of RC Frames in-filled with Lightweight Materials”, Proceedings of the 11th EASEC, 19-21 November, NTU, Taiwan 2008
14 Imran, I., Retika, A.C., Simatupang, R., (2008) “Mechanical Characteristics of Steel Rebars Available in Indonesian Industries”, Proceedings of the 11th EASEC, 19-21 November, NTU, Taiwan 2008
15 Djauhari, Z., Imran, I. (2008), “Study of Confinement Models for High-Strength Concrete Columns Confined by High-Strength Steel” Proceedings of International Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia 2008
16 Imran, I., (2007) “Sustainability Aspects in the Design of Concrete Materials and Structures: Consideration of Durability in Design Practice” Proceedings of Indonesia International Cement and Concrete Forum (IICCF 2007), 20-22 November 2007
17 Imran, I., (2007) “The 6 March 2007 West Sumatera Earthquake-Lesson Learned and Recommendations”, Proceedings of the International Symposium on Disaster in Indonesia (ISDI): Problem and Solution, Padang, 26-28 Juli 2007
D Nasional Conference Proceedings:
1 Jonbi, Hariandja, B., Imran, I., Pane, I., (2011) ”Aplikasi Nanoteknologi pada Pembuatan dan Karakterisasi Nano Silika dari Sumber Alam Indonesia” Prosiding Seminar Nasional-1 BMPTTSSI – Konteks 5, Medan, 14 Oktober 2011
2 Simatupang, P. H., Imran, I., Pane, I., Sunendar, B., (2011) ”Karakterisasi Mineral pada Pasta Geopolimer Berbahan Dasar Abu Batubara Kelas F dan Kelas C” Prosiding Seminar Nasional-1 BMPTTSSI – Konteks 5, Medan, 14 Oktober 2011
3 Nurjaman, H.N., Imran, I., Faizal, L., Sidjabat, H.R., (2011) ”Standar Nasional Indonesia Tentang Metoda Uji dan Kriteria Penerimaan Sistem Struktur Rangka Pemikul Momen Beton Bertulang Pracetak untuk Bangunan Gedung”, Prosiding Seminar HAKI 2011, Jakarta, 26-27 Juli, ISBN: 978-602-8605-04-5 2011
4 Kristianto, A., Imran, I., (2011) ”Perilaku Struktur Kolom Beton Bertulang dengan Modifikasi Pemasangan Tulangan Pengekang Akibat Beban Aksial dan Lateral Siklis”, Prosiding Seminar HAKI 2011, Jakarta, 26-27 Juli, ISBN: 978-602-8605-04-5 2011
5 Imran, I., (2011) ”Tinjauan Aspek Sustainabilitas dalam Perencanaan dan Pelaksanaan Konstruksi Beton” Prosiding Seminar Holcim 2011: ”Movement Toward Sustainability in Concrete Construction Technologies Seminar”, Bandung, 22 Februari 2011
6 Retika, A., Imran, I. (2010) ” Bond Behavior of U-50 Tempcore Reinforcement Bar under Monotonic and Cyclic Load”, Proceedings of Annual HAKI Seminar, Jakarta, 3 Agustus 2010
7 Imran, I., (2010) ” Detailing Criteria of Reinforced Concrete Building Construction in Strong Earthquake Zone Areas (Zone 5 and Zone 6) of Indonesia” National Seminar on Earthquake Resistant Structures Technology, Padang, 28 Juni 2010
8 Simatupang, P. H., Imran, I., Pane, I., Sunendar, B., (2010), ” Development of Rational Concrete Mixtures for Geopolymer Concrete through the Multiscale Research using Various Basic Materials”, Proceeding National Conference Pascasarjana Teknik Sipil, Bandung, 26 Mei, hal. C1-12 2010
9 Kristianto, A., Imran, I., Suarjana, M., (2010), ” Model Development of Binder Element for Reinforced Concrete Column”, Prosiding Konferensi Nasional Pascasarjana Teknik Sipil, Bandung, 26 Mei, hal. C13-22 2010
10 Gunadi, R., Budiono, B., Sofwan, A., Imran, I., (2010), ”Perilaku Lateral Sambungan Slab-Kolom Bertulangan Geser”, Prosiding Konferensi Nasional Pascasarjana Teknik Sipil, Bandung, 26 Mei, hal. C23-32 2010
11 Imran, I., (2010) ”  ”, Seminar Teknologi Beton, Palembang, 31 Maret 2010
12 Imran, I., Hoedajanto, D., Bukit, B., (2009) ”Kinerja Struktur Bangunan Gedung Beton Bertulang Dalam Kejadian Gempa Jabar 2009”, Seminar Nasional Bencana Gempa Jabar 2009, Bandung, 7 Desember 2009
13 Imran, I., Irfan, M., Rakhmadi, A., (2009) ”Baja Tulangan sebagai Salah Satu Faktor Penentu Keberhasilan Rancang Bangunan Beton Bertulang Tahan Gempa”, Seminar Nasional Besi Baja (SNBB 2009), ITB, 26-27 Oktober, hal. 300-312, ISBN: 978-979-8305-31-3 2009
14 Kristianto, A., Imran, I., Suarjana, M., (2009) ”Pengembangan Tulangan Pengekangan Kolom Beton Bertulang untuk Bangunan Apartemen dalam Rangka Meningkatkan Efektivitas Kekangan pada Saat Beban Gempa”, Seminar Nasional Perspektif Apartemen Bersubsidi Ditinjau dari Multidisiplin Ilmu, Univ. Maranatha, Bandung, 15 Agustus, hal. 1-11, ISBN: 978-979-16346-1-8 2009
15 Imran, I. (2009) ”Strategy toward Sustainable Concrete Construction”, Seminar on Strong and Healthy Construction, Univ Kristen Atmajaya, Yogyakarta, 18 April. 2009
16 Imran, I., Hoedajanto, D., Li, B., Meas, K., (2009) ”Permasalahan Detailing pada Bangunan Beton Bertulang Sederhana Tahan Gempa”, Seminar & Pameran Teknik 2009, HAKI, Jakarta, 11-12 Agustus, hal. 5, ISBN No. 978-602-8605-01-4 2009
17 Imran, I., Eddy, L., Mujiono, Fadilla, E., (2009) ”Studi Eksperimental Sambungn Kolom-Kolom pada Sistem Beton Pracetak dengan Menggunakan Sleeves”, Seminar & Pameran Teknik 2009, HAKI, Jakarta, 11-12 Agustus, hal. 8, ISBN No. 978-602-8605-01-4 2009
18 Tjahjanto, H.H., Imran, I., (2009) ”Kajian Performance Struktur Beton Bertulang dengan Dinding Pengisi”, Seminar & Pameran Teknik 2009, HAKI, Jakarta, 11-12 Agustus, hal. 9, ISBN No. 978-602-8605-01-4 2009
19 Imran, I., Yuliari, E., Suhelda, Kristianto, A., (2008) “Applicability of Capacity Design Method on the Design of Reinforced Concrete Shear Walls”, Proceedings of Annual HAKI Seminar, Jakarta, 19-20 Agustus 2008
20 Djauhari, Z., Imran, I., (2008) “Flexural Behavior of High Strength Concrete Columns Confined with High Strength Steel”, Proceedings of Annual HAKI Seminar, Jakarta, 19-20 Agustus 2008
21 Madutujuh, N., Suryoatmono, S., Imran, I., (2008) “Effect of Intermediate Stiffener on the Compressive Strength of Light Steel Sections – Analytical and Experimental Studies”, Proceedings of Annual HAKI Seminar, Jakarta, 19-20 Agustus 2008
22 Imran, I., Djauhari, Z. (2008) ”Performance of High Strength Concrete Columns Confined with High Strength Steel”, Proceedings of National Seminar on Indonesian Future Development of Concrete Structural Engineering, UPH, Jakarta, 21 Februari 2008
23 Imran, I., (2007) ”Post-Eartquake Assessment on Housing Damages and Practical Methods for Repairing the Damages”, Seminar Sosialisasi dan Uji Publik Panduan Perencanaan dan Pelaksanaan Rumah Sederhana Sehat (RsH) Tahan Gempa, Univ. Sam Ratulangi, Sulawesi Utara, 30 Agustus 2007
24 Imran, I., Rahayu, E.B., Febrianto, F., (2007) “Development of Earthquake Resistant Structural System for Monorail Guideway Structures”, Prosiding Tiga Roda Forum, Jakarta, 12 Desember, ISBN 978-979-25-1566-4 2007
25 Imran, I., (2007) “Penilaian Kondisi Kerusakan Rumah Pasca Gempa dan Cara-cara Perbaikan Praktis”, Seminar Sosialisasi dan Uji Publik Panduan Perencanaan dan Pelaksanaan Rumah Sederhana Sehat (RsH) Tahan Gempa, Univ. Sam Ratulangi, Sulawesi Utara, 30 Agustus 2007
26 Imran, I., Sutjipto, S., Tumilar, S., Ravano, P., Supriyanto, I., (2007) “Implementation of Principles of Sustainability in Construction for the Design of Mass Concrete: Case Study in Gandaria Main Street Project”, Prosiding Seminar Nasional Sustainability dalam Bidang Material, Rekayasa dan Konstruksi Beton, ITB, Bandung, 4 Desember, hal. 39-51, (ISBN 978-979-98278-1-4) 2007
27 Djauhari, Z., Imran, I., Setio, H.D., (2007) “Strength and Ductility Behavior of High Strength Concrete Columns Confined with High Strength Steel” Prosiding Seminar HAKI, Jakarta, 21-22 Agustus 2007
28 Hoedajanto, D., Imran, I., Aryanto, A., (2007) “Experimental Study on the Performances of Habel Floor and Wall Panels.” Prosiding Seminar HAKI, Jakarta, 21-22 Agustus 2007
29 Imran, I., Hasanudin, A., (2007), ”Resistance of PCC Concrete under Chloride Penetration”, Prosiding Tiga Roda Forum, Jakarta, 14 Agustus, ISBN 978-979-25-1565-7 2007
30 Djauhari, Z., Imran, I., Setio, H.D., Kusumastuti, D., (2007) ”Strength Behaviour of High Strength Concrete Columns Confined with High Strength Steel under Axial Compression.”, Prosiding Seminar Nasional Pascasarjana VII-2007, Vol. II, ISBN: 979-545-0270-1, Institut Teknologi Sepuluh Nopember, Surabaya, 2 Agustus, hal. SKH15 1-5 2007
31 Abduh, M., Soemardi, B., Imran, I., (2007) ”Lessons Learned from Yogyakarta Earthquake: The Important Role of Value and Supply Chains in Construction” Seminar Nasional Teknik Sipil III-2007: Peran Teknik Sipil dalam Manajemen Bencana, ITS, 20 Februari 2007
E Editors of International Conference Proceedings:
1 Imran, I., Surahman, A., Moestopo, M., and Sengara. W. Proceedings of International Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), Earthquake Disaster Risk Reduction: Engineering Challenges after Recent Disasters, Jakarta, Indonesia, 14-15 April 2008 2008
F Shortcourse Proceedings:
1 Imran, I., Budiono, B., (2010) “Mengapa Gedung-gedung Kita Runtuh Saat Gempa?” shortcourse pada Seminar HAKI 2010, Jakarta 4 Agustus, ISBN: 978-602-8605-03-8 2010
2 Hoedajanto, D., Imran, I, (2009). “Desain dan Perhitungan Struktur Tahan Gempa” shortcourse pada Seminar HAKI 2009, Jakarta, 13 Agustus, ISBN: 978-602-8605-01-4 2009
3 Imran, I., (2008), “Perencanaan Struktur Beton Bertulang Tahan Gempa untuk Bangunan Gedung”, shortcourse pada Seminar HAKI 2008, Jakarta, 21 Agustus, ISBN: 978-979-98441-9-4 2008
G Books:
1 Imran, I and Hendrik, F. (2010). “Structural Design of Earthquake Resistant Reinforced Concrete Buildings”, ITB Press, Bandung, 195 pp 2010
2 Imran, I., (2010) “Confinement sebagai Pensinergi Material Beton dan Baja Tulangan pada Struktur Bangunan Tahan Gempa” Pidato Ilmiah Guru Besar ITB, MGB ITB, ISBN: 978-602-8486-28-2 2010
3 Imran, I., (2010) Formulasi Ikon Jawa Barat “Jawa Barat sebagai Provinsi Agroindustri” 2010
4 Imran, I. (2009) “Perencanaan Struktur Gedung Beton Bertulang Tahan Gempa” Penerbit ITB 2010
5 Imran, I., Hoedajanto, D., Aryanto, A., (2009) “Prinsip-Prinsip Perencanaan Struktur untuk Keselamatan Bangunan Akibat Gempa”  Buku Konstruksi Indonesia 2009, Dept. PU Bandung 2009
6 Simanjuntak, JH; Imran, I. et al. (2009). “Precast Concrete Structures in Indonesia.” John Hitech Idetama, 100 p. (Chapter in Book) 2009
7 Imran, I. Hoedajanto, D., Sanny, T.A. (2008). “Concrete Materials and Standards for Designing Earthquake and Tsunami Resistant Structures in Nanggroe Aceh Darussalam Region”, Aceh Tsunami, Multi Solusindo Press, Yogyakarta (Chapter in Book) 2008
8 Imran, I., (2008) “Plasticity Based Constitutive Modelling of Confined Concrete”, Buku Kapita Selekta, Penerbit ITB, hal. 201-221 2008
9 Imran, I., Hoedajanto, D., Sanny, T.A., (2008) “Aspek Material dan Struktur Beton dalam Perencanaan Bangunan Tahan Gempa dan Tsunami di Wilayah Nanggroe Aceh Darussalam” Buku Tsunami Aceh, hal. 321-332 2008
10 Purwono, R., Tavio, Imran, I., Raka, I.G.P. (2007). “Indonesian Concrete Code for Buildings (SNI 03-2847-2002) with Commentary”, ITS Press, Surabaya. 2007
11 Imran, I. (2007). “Recent Development of Cement Based Materials for Construction”, Construction: Industries, Management and Engineering, pp. 125-140 (ISBN 979-3507-98-5) (Chapter in Book). 2007
12 Imran, I., (2007) “Pengembangan Terkini Teknologi Material Beton untuk Konstruksi” Buku Konstruksi: Industri, Pengelolaan dan Rekayasa, Penerbit ITB, hal. 125-140, ISBN 979-3507-98-5 2007
13 Purwono, R., Tavio, Imran, I., Raka, I.G. P., “Tatacara Perhitungan Struktur Beton untuk Bangunan Gedung (SNI 03-2847-2002) Dilengkapi Penjelasan (S-2002) 2007

Research experience

No. Title Of Research Year
1 Principal Investigator

The Development of Alkali Activated Material with Base Material from Metallurgical Waste to Obtain Green Material, National Strategic Competitive Research Grant

2012
2 Principal Investigator

The Use of Natural Fiber as Reinforcement for Masonry Structures – ITB Research Grant

2011
3 Principal Investigator

Behavior of R/C Structural Columns Confined with Lateral Reinforcement plus Added Pen-Binder under Axial-Eccentric Load, National Strategic Competitive Research Grant

2010
4 Principal Investigator

Development of Additional Ties to Increase Effective Confinement of R/C Columns while Accomodating Easy Installment, Competitive Research Grant based on National Priority Batch II

2009
5 Principal Investigator

Development of Sleeve Connection for Precast Concrete Columns of Moment Resisting Frames, Cooperative Research with Construction Industry (PT. Adhimix Precast Indonesia)

2009
6 Principal Investigator

Seismic Performance of RC Frames In-filled with Lightweight Materials: An Experimental and Analytical Study, ASAHI GLASS FOUNDATION

2008
7 Research Team Member

Experimental Study of Proposed Lightly Reinforced Concrete Exterior Beam Column Joint, LIFE-NTU (ITB-NTU Joint Research)

2008
8 Principal Investigator

Behavior of High Strength Concrete Short Columns Confined with High Strength Steel under Concentric Axial Compression, ITB Research Grant

2007

Project experience

No. Title Of Research Year
1 Structural Engineer, Evaluation of the Structural Safety of SIAK III Bridge, Pekanbaru, Riau. 2012
2 Team Leader, Detailed Engineering Design of Elevated Structures for Tanjung Benoa Toll Road Section I, Denpasar, Bali 2012
3 Structural Engineer, Detailed Engineering Design of Cantilever Bridge in Tabukan, Barito Kuala, South Kalimantan 2012
4 Team Leader, Assessment on the Causes of Collapse of Kutai Kartanegara Bridge, Tenggarong, East Kalimantan 2012
5 Structural Engineer, Detailed Engineering Design of Cantilever Bridge for Elevated Non-Toll Road, Antasari Section, Jakarta 2011
6 Structural Engineer, Detailed Engineering Design of Permata Apartment Building, Tangerang 2011
7 Structural Engineer, Detailed Engineering Design of Titanium Apartment Building, Jakarta 2011
8 Structural Engineer, Assessment on the Safety of Retaining Structures in Bank Indonesia Office in Cirebon, West Java 2011
9 Materal Engineer, Review of Mass Concreting in Jatigede Dam Project, West Java 2010
10 Structural Engineer, Detail Design of Metro Tanah Abang II, Jakarta 2010
11 Structural Engineer, Evaluation of the Structural Safety of Graha Elnusa Building, Jakarta 2010
12 Structural Engineer, Evaluation of the Structural Safety of Indonesia Banking School Building, Jakarta 2010
13 Structural Engineer, Structural Assessment of Steel Buildings at Rimau and Old Rimau Block of PT. Medco E&P Indonesia 2010
14 Structural Engineer, Seismic Study for Tuban Plant 2010
15 Structural Engineer, Emporium Pluit Mall & Hotel, CBD Pluit Phase 2, Jakarta. Review Design of Parking Area 2010
16 Structural Engineer, Review on Structural Design of PT BCU – Facility Extension (PT. Teamworx Indonesia) 2010
17 Structural Engineer, Redesign of MMC Tower in Kuningan, Jakarta 2010
18 Structural Engineer, Structural Evaluation of Lateral Capacity of Piles in Fixed Head Condition Derived from Those Tested under Free Head Condition for the 150 kV GIS Building at Plumpang 2010
19 Structural Engineer, Structural Assessment of FKIP Building in Unsyiah – Banda Aceh 2010
20 Structural Engineer, Structural Assessment of Kantor Bank Danamon Indonesia Kuningan, Jakarta 2010
21 Structural Engineer, Post-Earthquake Damage Assessment of Kantor Bank Indonesia Padang 2009
22 Structural Engineer, Post-Earthquake Damage Assessment of Buildings in ITB Campus 2009
23 Structural Engineer, Structural Evaluation of Traditional Market Buildings (Built under World Bank Funding) in Several Provinces in Indonesia 2009
24 Structural Engineer, Fatigue Assessment of Tomang Bridge Ramp A and Ramp B in Jakarta Inner City Toll Road 2009
25 Structural Engineer, Development of Site Specific Response Spectrum for Muara Karang, Jakarta 2009
26 Structural Engineer, DED of chimney with 80 m and 120 m high in PT. South Pacific Viscous, Purwakarta 2009
27 Structural Engineer, DED of Semen Andalas Indonesia (SAI) Jetty No. 2 in Lhok Nga, Banda Aceh 2009
28 Structural Engineer, Analysis and Design of Citayur Port of PT Krakatau Bandar Samudra in Cilegon 2009
29 Structural Engineer, Feasibility Study for the Construction of Port V Extension of PT Krakatau Bandar Samudra in Cilegon 2009
30 Structural Engineer, Verification Analysis of Pile Lateral Load Test of Tanjung Priok Power Plant Project 2009
31 Structural Engineer, Structural Desain for New Turbine Building of PT. South Pacific Viscous in Purwakarta 2009
32 Structural Engineer, Blast Resistant Design of Ammonium Nitrate Prill Plant Project in Bontang 2009
33 Structural Engineer, Detail Engineering Design of Main Plant Building of PLTU Lampung 2X100MW, Sebalang. Desa Tarahan, Lampung 2009
34 Structural Engineer, Review Design of Batanghari Bridge in Jambi 2009
35 Structural Engineer, Measurement and Analysis of Deflection and Strain Test for Steel Truss Bridge type A-50 of PT. Karunia Berca Indonesia) 2009
36 Structural Engineer, Redesign of  Hiliaurifa Elementary School in  Nias 2009
37 Structural Engineer, Detail Engineering Design of Blast Protection for PT Badak LNG Laboratory Building, Bontang 2008
38 Structural Engineer, Evaluation of the Safety of Cement Silo 1-4 and 5-8 (multi silo type) in Narogong Cement Plant of PT Holcim 2008
39 Structural Engineer, Detail Engineering Design of University Bridge in Bogor Nirwana Resort 2008
40 Structural Engineer, Detail Engineering Design of Access Bridges to Matahari Well Site of PT CNOOC in Batanghari, Jambi 2008
41 Structural Engineer, Detail Engineering Design of Gde Bage Stadium in Bandung 2008
42 Structural Engineer, Evaluation of the Safety of Silo NR3 in Naragong Plant of PT Holcim 2007
43 Structural Engineer, Evaluation of the Safety of Cooling Tower, PLTP Darajat, PT. Indonesia Power 2007
44 Structural Engineer, Design of Lhoknga Cement Plant Reconstruction Project, Civil Package, PT. Semen Andalas Indonesia 2007
45 Material Engineer, Design of Concrete Mix Proportion for Mass Concreting in Gandaria City Project, Jakarta 2007
46 Structural Engineer, Evaluation of the Safety of Cement and Blending Silo CC2 in Cilacap Plant, PT Holcim 2007